The Prestige Dental Model Making Kit is suited for Clinicians to produce patient casts in surgery without any mess, dust, vibrators or model trimmers. There are no mixing bowls or spatulas to wash, or the need to hold large tubs of stone in storage. The Kit consists of a set of 10 of our assorted Rimlock Stainless Steel Trays, a corresponding Kit of our silicone model formers (designed to fit each individual tray) and a pack of 18 of Earthstone (pre-measured powder and liquid stone). The procedure is easy. Once you have taken the impression, trim off the excess impression material from around the periphery of the tray and select the matching size of model former. Place this over the tray and then puncture the lid of the Earthstone powder pot with the pre-measured liquid bottle. Express the liquid into the stone powder pot and shake vigorously for a minute. The slurry of mixed stone can then be poured into the impression. This will set to a working hardness in 10 minutes (class IV die stone). This kit is especially useful if you want to produce your own casts for mounting on an articulator for diagnostic purposes. Alternatively, you may wish to produce your own bleaching trays, custom mouthguards, special trays, stents splints (see PrimoSplint) and many other applications. See our Vacuum Forming section for related vacuum forming blanks and equipment. Models are inexpensive to produce as well as quick and easy.