Wol-Ceram - Wol-Ceram

• Consistent coping thickness
• Proven success over 12 years using Vita In-Ceram material
• Predictable margin integrity
• Dentin coloured substructures for better shades
• EPC (Electrophoretic Ceramic Procedure)
• Conventionally cemented
• Single Units, Bridges up to 4 units and Implant Abutments

WHY WOL-CERAM®

The WOL-CERAM® System represents true breakthrough in the field of aesthetic all-ceramic restorations.
The system works off the master die, enabling it to produce an extremely accurate fit and the most precise margins of any CAD/CAM dental system available today.

WOL-CERAM® RESTORATIONS WORK ON ANY MARGIN PREPARATIONS!

The WOL-CERAM® System utilises an electro deposition dipping technique, it can handle any margin you prepare whether it be a shoulder, chamfer, or feather-edge margin.

What's more, the WOL-CERAM® copings, bridges and implant abutments are pre-shaded this also elimates the need for a masking opaque layer.

THE ELECTRO-LAYERING SYSTEM

The ELC (Electro Layered Ceramic) process starts when the die is immersed into the Inceram material. At this point an electrical charge is applied to the Inceram material and an opposite charge is applied to the die. The difference in polarity attracts the Inceram material to the die to form an extremely dense and uniform coping.

PERFECT FIT SYSTEM VS. CONVENTIONAL PROCEDURE

By using the WOL-CERAM& system, it is possible to keep the occlusal cement gap to a minimum which greatly eliminate the margin chips due to occlusal pressures that compress the cement. This is very important in posterior all ceramic copings, bridges and implant frames.

WOL-CERAM® FACTS

PROVEN QUALITY

Other all-ceramic systems emphasise high strength or short term success rates.What really counts is long-term clinical reliability. VITA In-Ceram® is an all-ceramic system proven by millions of successful restorative cases spanning more than 13 years. VITA In-Ceram® success rate of 98% assures you that your restorations will have the highest success.

THE STRENGTH OF WOL-CERAM®

The mechanical property of WOL-CERAM® framework remains, clearly on the clinically safe side.

YOU WILL BE AMAZED BY THE FIT!!!

MAKING THE SWITCH

SWITCHING TO AN ALL-CERAMIC RESTORATION HAS NEVER BEEN EASIER!

It’s a fact; most Dentists still prescribe PFM restorations to their patients.

Here are some of the reasons dentists are hesitant to prescribe all ceramic restorations and how WOL-CERAM® solves these problems.

Strength - WOL-CERAM® uses the most clinically proven all-ceramic material, with long term success of over 98%!

Preparation - WOL-CERAM® system works off Feather Edge, Chamfer, and shoulder Preparations. You will not need to learn ANY new techniques.

Cementation - WOL-CERAM® restorations can be cemented or bonded, which ever you prefer.

Aesthetics - Unlike other systems,WOL-CERAM® restorations are pre-shaded in the dentine colour of your choice and have more translucency than any other preparation, giving an overall more natural look.

Biocompatibility - All ceramic restorations have been clinically proven to be more biocompatible than all other restorations.

The most important factors for a dentist are his or her patient’s health and satisfaction.

Switching to an all-ceramic restoration, which offers the strength, aesthetics, and biocompatibility, thatWOL-CERAM® delivers, makes the WOL-CERAM® system a natural choice.