Parkell - Restorative Products

From impression to finished dies in less than 6 minutes.

Mach -2® Die Silicone gives you top-quality working dies in just minutes ... for indirect composite inlays ... for chairside denture repairs ... for fast resin veneers or temporaries.



Using a conventional impression gun, you simply inject this unique, flowable silicone directly from the automix cartridge into an alginate impression. There’s no mixing. It’s highly fluid (roughly the consistency of warm syrup), so it flows beautifully, capturing every minute detail.

As soon as you’ve poured the dies, you create the model-base using Super-Fast Blu-Mouse.

That’s all there is to it. Two minutes later you’re ready to remove the finished model and separate the die.

And what a die it is!

Take your models out of the stone age

Mach-2 silicone is hard and about the same colour as stone. But with just the slightest flexibility. So composite inlay’s release easily … even from minor undercuts.

It flows better than stone. It creates a smoother die than most stones. And it’s more rugged. It won’t chip, abrade, or crack like stone. You trim the Mach-2 die using a common razor blade. No burs. No dust.

Mach-2 sets to an opaque, highly-reflective colour. So when you direct you’re curing gun at an inlay’s occlusal surface, the transmitted light bounces off the walls and floor to promote polymerization from all directions.

By the way, if you’re a fan of heat-tempering to create he best possible physical properties, you can pop the composite restorations into a toaster oven at 250 °F (120 °C) for ten minutes while they’re still sitting on the dies!

Now in 2 setting speeds

MACH-2®	MACH - SLO™
VERY ACCURATE VERY FLOWABLE VERY HARD	VERY ACCURATE VERY FLOWABLE VERY HARD

Because of it’s super-fluidity, some dentists want to use Mach-2 as the wash in a two-step polyvinyl impression. However the speed posed a problem.

Mach-2 was designed to set in an alginate impression in about 45 seconds. In the warmth of the mouth, however, Mach-2 sets in just 30 seconds. In other words, it begins to gel almost the instant it touches the tooth.

Introducing Mach-SLO™ - Except for its slower-set Mach-SLO is exactly like Mach-2. On the bench, it sets in 2 minutes. In the mouth, it sets in 90 seconds. This makes it an excellent choice for intraoral use ... or for making complex models.

Starter Setup (Stock No. S432S) Each setup contains 1 Automix cartridge of Mach-2 Silicone (50 ml), 2 Automix cartridges of Super-Fast Blu-Mousse (total 100 ml), plus tips & 4 reusable base formers.

Mach-2® Silicone (Stock No. S433S) Each pkg. contains 2 Automix cartridges (total 100 ml) plus 10 automix tips.

New Mach-SLO™ Silicone (Stock No: S430S) Just like Mach-2 but with a more leisurely set (90 seconds in the mouth, 2 minutes on the bench.) Great for large models or intraoral use. Each pkg. contains 2 Automix cartridges (total 100ml) plus 10 automix tips.